Dulux Weathershield Satin provides an attractive mid-sheen finish and guarantees 6 year weather protection provided surfaces are in good condition before application. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.
Leave 6 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.
Apply 1 or 2 coats with a brush. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Dulux Weathershield Satin Information
Number of coats: 2 coats
Preparing the surfaces: Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ BP wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
Painting: Apply 1 or 2 coats with a brush. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Cleaning: Remove as much of this product as possible from the brush with a cloth and then wash with water.
Storing: Store paint in dry conditions and protect from extreme temperatures.