Select Page

Stihl FS410 C-EM Brushcutter (Comes with Strimmer Head)

£972.00 £779.00

The Stihl FS410 C-E brushcutter has a 41.6 cc engine with a 2.0 kW / 2.7 hp power output. It weighs 8.5 kg without guard and fuel.

Bulk ordering of Stihl available – please call 01283 217133


The Stihl FS410 C-E brushcutter has a 41.6 cc engine with a 2.0 kW / 2.7 hp power output. It weighs 8.5 kg without guard and fuel.

The Stihl FS410 C-E is comfortable to use, durable and robust. It is a very powerful clearing saw that features Stihl ErgoStart for smooth, easy starting, it has a Stihl 2-MIX engine that consumes up to 20{d09b12be51a7a6a48787a7bc3312473190ccc1fdbfe07795db7f7cb91fdca1cd} less fuel and 70{d09b12be51a7a6a48787a7bc3312473190ccc1fdbfe07795db7f7cb91fdca1cd} less emissions compared to conventional two-stroke engines without 2-MIX technology and a 4 point anti-vibration system for reduced fatigue. The FS 410 C-E is ideal for contractors, landscapers, local authorities and demanding property owners with large areas to maintain. Click to see our full range of Stihl brushcutters.

Stihl FS410 C-E features

  • Reduced-emission engine technology
    Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20{d09b12be51a7a6a48787a7bc3312473190ccc1fdbfe07795db7f7cb91fdca1cd} lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Large fuel tank
    Large fuel tank

    The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Air filter with long service life
    Air filter with long service life

    The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)

  • Winter setting slide control
    Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Manual fuel pump (Purger)
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • STIHL M-Tronic
    STIHL M-Tronic

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • STIHL ErgoStart (E)
    STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • Simplified starting system
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Bike handle
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • STIHL 4-point anti-vibration system
    STIHL 4-point anti-vibration system

    In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)


Stihl FS410 C-E Brushcutter specification

Displacement cm³ 41.6
Power output kW/bhp 2.0/2.7
Weight kg 1) 8.5
Sound pressure level dB(A) 2) 99
Sound power level dB(A) 2) 111
Vibration levels left/right m/s² 3) 2.3/2.1
Vibration levels left/right with metal blade m/s² 3) 2.0/1.7
Overall length m 4) 1.79
Standard cutting tool AutoCut 40-2
Tank volume l 0.75

Masseys are open 7 days a week. Our staff are happy to advise in store.



Purchased from Masseys – If your machine was purchased from Masseys and it develops a manufacturing fault during the warranty period, simply return the machine to store and our mechanics will repair the machine free of charge. A warranty repair is when the machine has failed because of improper material or workmanship, under normal use and maintenance.

Purchased online – If your machine was purchased from elsewhere, then we charge an initial £29.99 inspection charge to look at the machine. This will be refunded if the fault is a warranty issue and when the manufacturer has processed and accepted the warranty claim in full. Warranty for non-Masseys customers is 4-12 weeks as we have a duty to ensure our own customers are prioritised first.