Select Page
Sale!

Stihl FS460 C-EM Clearing Saw (Comes with Strimmer Head)

£972.00 £739.00

The Stihl FS460 C-EM brushcutter has a 45.6 cc engine with a 2.2 kW / 3.0 hp engine and weighs 8.5 kg without guard and fuel.

Bulk ordering of Stihl available – please call 01283 217133

Description

The Stihl FS460 C-EM brushcutter has a 45.6 cc engine with a 2.2 kW / 3.0 hp engine and weighs 8.5 kg without guard and fuel. Comes complete with an AutoCut 46-2 mowing head.

The Stihl FS460 C-EM features M-Tronic – the fully electronic engine management system which adjusts ignition timing and fuel metering in all operating modes. It also features ErgoStart for smooth, easy starting and the Stihl 2-MIX engine that consumes up to 20{d09b12be51a7a6a48787a7bc3312473190ccc1fdbfe07795db7f7cb91fdca1cd} less fuel and 70{d09b12be51a7a6a48787a7bc3312473190ccc1fdbfe07795db7f7cb91fdca1cd} less emissions compared to conventional two-stroke engines without 2-MIX technology.

The 4 point anti vibration system gives great reading – Vibration levels left/right m/s² 3) – 2.5/2.1 and Vibration levels left/right with metal blade m/s² 3) – 1.9/1.6. Click to see our full range of Stihl brushcutters.

  • Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20{d09b12be51a7a6a48787a7bc3312473190ccc1fdbfe07795db7f7cb91fdca1cd} lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions on the Stihl FS460 C-EM brushcutter.

  • Large fuel tank
    Large fuel tank

    The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Air filter with long service life
    Air filter with long service life

    The easily accessible paper filter with a long service life means it can go for long intervals without changing on the Stihl FS460 C-EM brushcutter. (similar to illustration)

  • Winter setting slide control
    Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Manual fuel pump (Purger)
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Start flap lever (M-Tronic)
    Start flap lever (M-Tronic)

    With the M-Tronic on the Stihl FS460 C-EM brushcutter, you do not have to worry about cold or warm start. With M-Tronic there is only one starting position on the start flap lever. The system detects cold or warm start automatically and electronically calculates the exact amount of fuel. You can start with fewer starting strokes and can apply full throttle immediately. If you press the throttle trigger the start rotary switch will automatically return to the operating position. (similar to illustration)

  • STIHL M-Tronic
    STIHL M-Tronic

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • STIHL ErgoStart (E)
    STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • Simplified starting system
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the Stihl FS460 C-EM brushcutter is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Bike handle
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • STIHL 4-point anti-vibration system
    STIHL 4-point anti-vibration system

    In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)

  • Locking plug-in bolt
    Locking plug-in bolt

    Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)

  • Multi-function control handle
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.

  • Compensator
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.

  • Tool free handle adjustment
    Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

Stihl FS460 C-EM Brushcutter specification:

Displacement cm³ 45.6
Power output kW/bhp 2.2/3.0
Weight kg 1) 8.5
Sound pressure level dB(A) 2) 100
Sound power level dB(A) 2) 113
Vibration levels left/right m/s² 3) 2.5/2.1
Vibration levels left/right with metal blade m/s² 3) 1.9/1.6
Overall length m 4) 1.79
Standard cutting tool AutoCut 40-2
Tank volume l 0.75
1) without cutting tool and deflector
2) Power factor according to DIR2006/42/EC=2.5(dB(A))
3) (K) factor according to Dir. 2006/42/EC = 2m/s²
4) without tool

 

Masseys are open 7 days a week. Our staff are happy to advise in store.

Warranty

Purchased from Masseys – If your machine was purchased from Masseys and it develops a manufacturing fault during the warranty period, simply return the machine to store and our mechanics will repair the machine free of charge. A warranty repair is when the machine has failed because of improper material or workmanship, under normal use and maintenance.

Purchased online – If your machine was purchased from elsewhere, then we charge an initial £29.99 inspection charge to look at the machine. This will be refunded if the fault is a warranty issue and when the manufacturer has processed and accepted the warranty claim in full. Warranty for non-Masseys customers is 4-12 weeks as we have a duty to ensure our own customers are prioritised first.