Apply directly to damp surfaces
Stops freeze thaw damage
Use on brick, concrete and stone
Give the surface a decent scrub with a stiff bristle brush. Fill any cracks and do pointing repairs, if needed.
Give the tin a good shake. Apply using a brush or roller. If you’re tackling a wall, work in 1m sections from the bottom upwards. Once an area is fully saturated move onto the next section. Don’t forget to give those mortar lines a soaking too. Make sure you treat the whole wall and not just isolated areas.
As soon as the first coat has soaked in, you can crack on with the second coat
Clean your equipment in warm water and detergent